Boat builder, boat restorer says, “I DO BETTER, FASTER WORK THAN MY COMPETITION THANKS TO MY WOODMASTER DRUM SANDER!”

Glen Taniguchi had been in the boat building and boat restoration business for 35 years when we spoke with him. He’s got a unique, high-end niche    woodworking business in Washington state, and said he couldn’t do it without his Woodmaster Drum Sander. Here’s Glen’s story…

Here's Glen Taniguchi with his Woodmaster Drum Sander and an example of some of the work he does as he's building and restoring high-end boats in his Washington state shop. "I couldn't do the work I do without the Woodmaster," he says. "It gives me an edge over my competition."

Here’s Glen Taniguchi with his Woodmaster Drum Sander and an example of some of the work he does as he’s building and restoring high-end boats in his Washington state shop. “I couldn’t do the work I do without the Woodmaster,” he says. “It gives me an edge over my competition.”

“I’m a self-employed professional woodworker. I create and restore high-end boats and boat interiors. I’m a subcontractor; I work for several different companies. I don’t think I could do a lot of this work without my Woodmaster Drum Sander. It gives me the edge over my competition to do things that would be impossible without it. I’m faster and do things my competition can’t. For example, I’m working on a 50-foot catamaran (twin-hulled boat) and the owner wanted a teak and maple floor. I glued it all together on a piece of plastic. When the glue dried, I was able to run the floor panels through the sander and bring it all down 1/4”. If I hadn’t had the Woodmaster, I’d have had to do it a more traditional way: laying the floor piece-by-piece and sanding it with a buff pad. That would have taken a long time and would have been very labor intensive. This way, I made panels and laid them in — just like fitting sheets of plywood.

SAVE BIG NOW on Woodmaster Molder/Planers – sale prices, online specials

SAVE BIG NOW on Woodmaster Drum Sanders – sale prices, online specials

The Woodmaster saves him time and does a better job than a hand-held sander

My Woodmaster has paid for itself. I use it on a daily basis, it helps me every day. I can sand molding, flooring, doors, and more. All I have to do is run my work through and it’s a finished piece. I save an immense amount of time and it’s a much better job than if I’d used a belt sander and a dual-action sander.

Onboard a boat, space is at a premium. Glen uses fine cabinetry skills to make the most of every square inch.

Onboard a boat, space is at a premium. Glen uses fine cabinetry skills to make the most of every square inch.

Making doors, for example: I glue them up, run them through the Woodmaster, and I’m done. I get a perfectly flat and even surface that would have taken far longer by hand. Another example is a set of cabinet doors I made for the boat I’m working on. It’s a three or four million dollar boat and the panels are all veneer. I glued burl onto a substrate of the same cherry I’m using for the frames. Then I ran the panels through the Woodmaster and brought the veneer down to the same level as the cherry frames. They look wonderful. If I’d sanded then by hand, it would have been very difficult to keep everything even.

Half an hour’s hand sanding done in just 10 minutes

What would take me hours to sand by hand I can sand in minutes. I work with less fatigue because the machine does the work. It was always kind of depressing to see a big stack of doors that would take me a day or two to get through — now I can do them in a few hours. Jobs take less time; they’re less labor intensive, less demanding, and the Woodmaster does a better job that you do.

I can multi-task now: I run a panel through the sander do something else while the Woodmaster is doing its thing. I’m working more than twice as fast. Polishing a 6” x 8’ board by hand would take at least half an hour. With the Woodmaster it takes maybe 10 minutes. I typically don’t buy Grizzly® or tools imported from China. Most of my tools are professional grade. I think it’s a good thing that Woodmaster is made in the USA. I’ve used it a lot and I’ve never had any problems with anything. Bearings and tracking are all good. It was a terrific purchase for my business.

I’d recommend Woodmaster to a friend. If you look around, you won’t find anything better on the market in the price range. For the kind of woodworking I do, this machine is perfect.”

— Glenn Taniguchi, Glen Taniguchi Woodworking, Port Ludlow WA

SAVE BIG NOW on Woodmaster Molder/Planers – sale prices, online specials

SAVE BIG NOW on Woodmaster Drum Sanders – sale prices, online specials

QUESTIONS? COMMENTS?

3 WAYS we can help you!