February | 2014 | Woodmaster Tools : Testimonials

We Americans are an independent people — it’s in our blood. Family’s important, as is faith, and so is a strong desire to do things for ourselves using our own resources. These traditional American values are part of our national character and they run strong and deep in Vermonters like Eli and Kaylina Phoenix.

Kaylina Phoenix ran flooring through their Woodmaster Molder/Planer. "She likes to get right in there," says her husband, Eli.

Kaylina Phoenix runs flooring through their Woodmaster Molder/Planer. “She likes to get right in there,” says her husband, Eli. “She runs our TimberKing sawmill, too.”

“My wife and I built our own home ourselves. We hired certain aspects, but Kaylina and I did everything else. I’m a Christian and I’m thankful to the Lord that he helped us through the project. I took a lot of work and about a year and three months but we’re moved in now. Doing work ourselves, I credit God with helping us make decisions and giving me the strength to work late nights and weekends; giving me the strength to build our home.

3 generations built their own homes

Building their home was a family affair. On the job site, Kaylina holds son, Jace, while Eli holds daughter, Colette.

I’ve been in construction my whole life. I work for my dad’s roofing company; he started the company when I was 3 or 4. He built his own home and my grandpa built his home, too. He actually built four houses. So building my own home was something I’ve always thought about. I’ve seen how it’s done, and I accumulated many ideas over the years. I had a good idea of what I wanted to do. I had experience and access to tools and equipment.

SAVE BIG NOW on Woodmaster Molder/Planers – sale prices, online specials

SAVE BIG NOW on Woodmaster Drum Sanders – sale prices, online specials

We own 70 acres in Southern Vermont, a gift from my dear grandfather, Edwin Phoenix, who passed away in 2012. He bought an old farmhouse and 400 acres in Townshend, Vermont in 1958 so he could raise his family in the country. I was born and raised here. There’s no way we could have built our home like we did without the land and the resources it provided. The wood on our property is about 50% pine, 10% hemlock, and the balance is birch, maple, cherry, with a little bit of oak. For this project we used maple and cherry for the flooring, trim, and counters.

TimberKing sawmill & Woodmaster Molder/Planer work together

Eli bought a TimberKing 1220 sawmill to mill lumber from his own trees. “It did everything I needed it to do,” he says. TimberKing and Woodmaster are sister companies out of Kansas City, Missouri.

I cut and felled the trees we used. We have a John Deere tractor with logging winch on the back. We went in the woods, skidded them out, and milled them ourselves on our 1220 TimberKing sawmill. I had someone else kiln dry the boards, then Kaylina and I planed them with our Woodmaster Molder/Planer.

My TimberKing sawmill works great. I’ve had no issues at all. It set up nice, always works really well, cuts nice lumber as long as you keep a sharp blade on it. How precise? I cut boards 7/8”, roughcut, I plane them down and get 11/16” lumber, finished both sides. I lost only 3/16” planing down both sides of lumber. In sawing 3,500 feet of lumber, I had only one or two boards that didn’t come out right. They were right on the money and I was very happy about that.

The Phoenix place is shaping up as Eli glues up wide cherry boards he cut and planed into his kitchen counters.

I’m using the Woodmaster Molder/Planer to turn my own lumber into my own flooring, trim, counters and more. I wanted to do my own planing because I’m able to do what I need to do. It’s also a cost saving thing. I enjoy woodworking, and having a machine like this is a benefit. I’ll use it for life. I milled all my own lumber on my TimberKing and I finished it myself on my Woodmaster. If I sent the roughcut boards to someone, it would cost 20 or 30 cents a foot to plane them. This way I could plane as much as I need and if I needed a little more I could just make more. That gave me flexibility and eliminated one more step to getting it done the way I want it. I like to do myself.

“Get ready for late nights and long weekends,” says Eli. Here he’s laying down hardwood flooring he made.

I got the Pro Pack with my Woodmaster and I made my own crown molding from pine and painted it. I made some out of cherry, too. It worked slick. I was impressed. I wasn’t sure what to think of it when I got it but it worked really well and made really nice molding. There’s no pulling, no chatter. Variable feed rate and feed rollers make it smooth molding. I have an old 15” planer that has just one speed. It tends to pull the grain. Woodmaster’s variable feed rate is really key because you can slow it right down. You have to go slow because, when you make molding, you’re taking off a lot of wood.

One molder does it all: 4-in-1 molder, planer, sander, saw

I chose Woodmaster because of its versatility. I researched Logosol and some other 4-head machines but they cost quite a bit more and WoodMaster has four functions in one: planing, molding, sanding, and sawing in the same machine. That made sense to me as homeowner and weekend woodworker: I don’ t need four or five $20,000 molding machines. One Woodmaster lets me set it up for whatever I need and change functions easily.

I bought the mid-sized model — you can plane a lot of wide boards on that. I liked it for the width. And I got the ProPack because I wanted the capability to do both planing and molding. I liked that idea of the rip saw and drum sanding features that are in the ProPack, too.

It performs very well. I haven’t had any problems. I planed 12” oak, maple, and cherry on it and it did it beautifully. It’s a very powerful machine so it doesn’t bog down. The 5HP motor is big, you need that power for making molding.

“I’d like to start a molding business later on”

My Woodmaster has worked well for me and has done everything I needed it to do. If you’re looking for a machine that’ll do a lot of different things, it’s definitely the way to go. I would like to do a molding business later on, owing the Woodmaster opens that door for me. I could process and sell molding at lower prices than a lumberyard. Opens doors. If you enjoy woodworking and being able to plane and make molding, it’s a good machine.

“I saved money I didn’t have, both machines paid for themselves”

Both my TimberKing sawmill and my Woodmaster Molder/Planer hav paid for themselves. If you buy wide plank maple or cherry, you’re paying maybe $10 to $15 a square foot. When you multiply that over 3,000 sq. ft., they’ve definitely paid for themselves.

Home Sweet Home — the Phoenix’s hand-built home on 70 beautiful wooded acres in Southern Vermont. Inspired by his dad and granddad, Eli built it himself.

The way I look at it, I saved money I don’t have. We couldn’t have afforded to buy the materials I made myself. The flooring I made is worth probably $14 a sq. ft. I put down about 1000 sq. ft. of flooring and saved maybe $17,000 to $20,000 worth of flooring, trim, countertops, and lumber. The Woodmaster was around $3,000, and the TimberKing sawmill was about $4,000. I probably saved 60% to 70% by doing it myself with these machines. Plus there’s the pleasure of doing it yourself. On top of that there’s leveraging my time and effort — sweat equity.

Late nights and long weekends

Is a man's home his castle? From the smile on Eli's face, we believe it is...especially when you've built it yourself.

Is a man’s home his castle? From the smile on Eli’s face, we believe it is…especially when he’s built it himself.

If anyone else is thinking of building a home while you’re working full time, as I did, you need to be prepared for late nights and long weekends. It’s a lot of work but it’s very satisfying to go from cutting the trees to putting down the flooring. That’s very satisfying to me. I like to see things thru the whole process from start to finish. There were times when I was putting down flooring and could recognize the wood from when I was cutting the trees. It’s also a learning experience. It’s very satisfying, but you have to be prepared to put in long hours to get the project finished. If you’re willing to put in time, sweat, and hard labor, it’s definitely worth it because in the end you have a home and you know what went into it.

Jace turns three in a few weeks and he’s already a Woodmaster fan. We’re betting he’ll build a home of his own one day.

My wife encouraged me to buy the sawmill and molder/planer becaue she knows I like woodworking and because it would be a benefit to I’d have the machines after we finished the house. That helped justify the purchases. She was right out there running the mill, planing wood, she was in the woods helping me do logging, cutting flooring. She had a lot of good ideas and really influenced design. She likes to get right into it and her help really speeded things up.”

— Eli Phoenix, Woodmaster Molder/Planer & TimberKing Sawmill owner, Townshend, Vermont

SAVE BIG NOW on Woodmaster Molder/Planers – sale prices, online specials

SAVE BIG NOW on Woodmaster Drum Sanders – sale prices, online specials

QUESTIONS? COMMENTS?

3 WAYS we can help you!

Call us TOLL FREE 1-800-821-6651
• Email us info@woodmastertools.com
• Connect with us on Facebook

Glen Taniguchi had been in the boat building and boat restoration business for 35 years when we spoke with him. He’s got a unique, high-end niche woodworking business in Washington state, and said he couldn’t do it without his Woodmaster Drum Sander. Here’s Glen’s story…

Here’s Glen Taniguchi with his Woodmaster Drum Sander and an example of some of the work he does as he’s building and restoring high-end boats in his Washington state shop. “I couldn’t do the work I do without the Woodmaster,” he says. “It gives me an edge over my competition.”

“I’m a self-employed professional woodworker. I create and restore high-end boats and boat interiors. I’m a subcontractor; I work for several different companies. I don’t think I could do a lot of this work without my Woodmaster Drum Sander. It gives me the edge over my competition to do things that would be impossible without it. I’m faster and do things my competition can’t. For example, I’m working on a 50-foot catamaran (twin-hulled boat) and the owner wanted a teak and maple floor. I glued it all together on a piece of plastic. When the glue dried, I was able to run the floor panels through the sander and bring it all down 1/4”. If I hadn’t had the Woodmaster, I’d have had to do it a more traditional way: laying the floor piece-by-piece and sanding it with a buff pad. That would have taken a long time and would have been very labor intensive. This way, I made panels and laid them in — just like fitting sheets of plywood.

SAVE BIG NOW on Woodmaster Molder/Planers – sale prices, online specials

SAVE BIG NOW on Woodmaster Drum Sanders – sale prices, online specials

The Woodmaster saves him time and does a better job than a hand-held sander

My Woodmaster has paid for itself. I use it on a daily basis, it helps me every day. I can sand molding, flooring, doors, and more. All I have to do is run my work through and it’s a finished piece. I save an immense amount of time and it’s a much better job than if I’d used a belt sander and a dual-action sander.

Onboard a boat, space is at a premium. Glen uses fine cabinetry skills to make the most of every square inch.

Making doors, for example: I glue them up, run them through the Woodmaster, and I’m done. I get a perfectly flat and even surface that would have taken far longer by hand. Another example is a set of cabinet doors I made for the boat I’m working on. It’s a three or four million dollar boat and the panels are all veneer. I glued burl onto a substrate of the same cherry I’m using for the frames. Then I ran the panels through the Woodmaster and brought the veneer down to the same level as the cherry frames. They look wonderful. If I’d sanded then by hand, it would have been very difficult to keep everything even.

Half an hour’s hand sanding done in just 10 minutes

What would take me hours to sand by hand I can sand in minutes. I work with less fatigue because the machine does the work. It was always kind of depressing to see a big stack of doors that would take me a day or two to get through — now I can do them in a few hours. Jobs take less time; they’re less labor intensive, less demanding, and the Woodmaster does a better job that you do.

I can multi-task now: I run a panel through the sander do something else while the Woodmaster is doing its thing. I’m working more than twice as fast. Polishing a 6” x 8’ board by hand would take at least half an hour. With the Woodmaster it takes maybe 10 minutes. I typically don’t buy Grizzly® or tools imported from China. Most of my tools are professional grade. I think it’s a good thing that Woodmaster is made in the USA. I’ve used it a lot and I’ve never had any problems with anything. Bearings and tracking are all good. It was a terrific purchase for my business.

I’d recommend Woodmaster to a friend. If you look around, you won’t find anything better on the market in the price range. For the kind of woodworking I do, this machine is perfect.”

— Glenn Taniguchi, Glen Taniguchi Woodworking, Port Ludlow WA

SAVE BIG NOW on Woodmaster Molder/Planers – sale prices, online specials

SAVE BIG NOW on Woodmaster Drum Sanders – sale prices, online specials

QUESTIONS? COMMENTS?

3 WAYS we can help you!